Automatic Cotton tissue/ Paper Tissue Production Line

Short Description:

DL-1050 Automatic Cotton tissue/ Paper Tissue folding machine

Using  single-arm  hanging material to roll, with imported loading forklift, easy to replace raw materials, easy to operate;Each roll of material is equipped with an independent magnetic powder tension controller. According to various mesh structures, the material weight can be adjusted independently, and the tension can be reduced smoothly.


Product Detail

Product Tags

Using  single-arm  hanging material to roll, with imported loading forklift, easy to replace raw materials, easy to operate;Each roll of material is equipped with an independent magnetic powder tension controller. According to various mesh structures, the material weight can be adjusted independently, and the tension can be reduced smoothly.

detail (3)

Equipment performance and structural features

1.Equipment size:L5.5m * W2.0m * H2.2 m. Can process cotton tissue/facial paper tissue.
2.Mechanical properties: A. this machine is a rectangular non-woven cloth/Paper which is cut by spiral cutter roller and folded into chain type. B.This machine adopts vacuum adsorption automatic cutting counting function which has the advantages of high speed, neat folding and simple operation. C. this machine can be configured according to customer requirements embossing device, clear pattern. D. product width is adjustable(200 dimensions one out of five).
3.Production speed: fold 500--900 pcs / min, according to the tension of non-woven fabric, the machine can adjust the tension of non-woven fabric size two places to ensure the folding of finished product size accuracy
4.Folding roller material of folding machine adopts international 4 steel, after adjusting hardness up to HB220-280 degree, the surface is plated with hard chromium, the clamping mouth is treated by wire cutting, the splint is stainless steel, the joint must be tight, flat and seamless. Clamp non-woven fabric and chuck need to be tight, exquisite workmanship is not loose.
5.The whole machine table and discharge slot are stainless steel plate, the length of the knife back to the end of the discharge slot is 1 m. Using folding machine, flat, smooth, size standard
6.The equipment adopts frequency converter speed regulation, the total power is 28 kw, the electrical reasonable, beautiful, easy to operate.
7.The whole machine frame adopts the national standard molding steel, the surface is treated with rust-proof spray molding, all the machine chassis are surrounded by 30 stainless steel material, the frame welding size is accurate, the support is properly strengthened, the pulley, the bevel gear and all the transmission parts are accurate.
8.Standard parts screws are made of domestic 45# and inner hexagonal screws, which are easy to affect the finished products by stainless material. The whole machine all electroplating finish is good ,2 years will not rust, delamination.

Model

DL-1050 Automatic cotton tissue/paper tissue production line

 

Capacity speed 500-900pcs/min(base on the materials)
Source 380V/50Hz
Power 32kw
Dimension L5500mm*W2100mm*H2200mm
Weight 5500kg
Frequency DELTA (made of Taiwan)
Fan 22.5KW,Dragon Iron Fan
air cylinder ShenChi
Motor Shanghai
Suction stick Guangzhou
Axle Ha’er Bing
detail (1)
detail (4)

Large rotary cutter

detail (2)

Product characteristics:

This machine is suitable for automatic cutting of cotton tissue/paper tissue ,Accurate feeding of servo system, vertical tolerance and length error of cutting paper less than or equal to 1 mm

Complete machine by PLC centralized control, cut flat.

Man-machine interface interactive operation, servo control cut length, frequency conversion speed regulation, Set aside the interface between pre-processing machine and packing machine to form automatic packing production line.According to the needs of users, can be configured with two-way, transfer transport and so on

Capacity 40-130 cutter/min
Control system Siemens
Power 11kw
Materials Cotton tissue , towel, paper tissue etc

Automatic packing machine

Performance and structural characteristics of the equipment:

1..Working principle of the equipment: automatic conveying → automatic bagging → automatic sealing → automatic completion.

2.PLC programmable controller is used to program the whole machine.
3.The equipment uses high sensitivity photoelectric detection sensor feeding to prevent plugging and feeding accuracy.

4.The equipment is equipped with manual and automatic operation mode. The manual program can be controlled by pedal, and the bagging speed can be adjusted freely according to the need.
5.Equipment suture temperature independent PID control, better suitable for all kinds of packaging materials, improve sealing quality.
6.Compact structure, fast packaging speed, stable and reliable performance, high degree of automation, simple operation, is the production of tissue packaging products!

detail (5)
detail (6)

Technical parameters of equipment: 

Capacity 30-50bags/min (based on packaging material)
Frequency 50HZ
Power 220V/380V
Source 8kw
Weight 700KG
Dimension L2800*W900*H1400

Pictures of the sample

detail (7)
detail (8)

FOB  

40%:Deposit

60%:Before shipment

Delivery time: 40-55days


  • Previous:
  • Next:

  • Send your message to us:

    Write your message here and send it to us
    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us