1. equipment automatically line, count, slitting, winding at the same time. The end surface neat level.
2. the equipment is equipped with infrared automatic double counting device and automatic stop function.
3. equipment with pneumatic automatic distribution device, pneumatic shaft automatic unwinding, pneumatic wide belt with a long roll synchronous conveying device, cutting automatic pneumatic lifting device, mobile device, pneumatic separation about real spiral drilling, light and smoot...
1. The device is controlled by the computer touch screen, and the servo motor is used to ensure that the surface of the product is not subject to tensile deformation, advance at uniform speed, and set an arbitrary section length.
2. The discharging device is equipped with a hanging belt tension control device.
3. The finished feeding platform of the equipment is equipped with an automatic lifting system
4. The equipment is equipped with about 10 wrinkle rollers(According to demand ) ,In or...
Using single-arm hanging material to roll, with imported loading forklift, easy to replace raw materials, easy to operate;Each roll of material is equipped with an independent magnetic powder tension controller. According to various mesh structures, the material weight can be adjusted independently, and the tension can be reduced smoothly.
1.Equipment size:L5.5m * W2.0m * H2.2 m. Can process cotton tissue/facial paper tissue.
2.Mechanical properties: A. this machine is a rectangular n...
Model
DL-ZP(100-600)
Folding Size
Product 300-700mm, Can Be Customized To Fold Product Size
Folding Device
High Precision Wire Cutting Process
Folding Method
N, W,1/4, Can Be Customized
Control Procedures
The Frequency Conversion Speed Control
Printing Device
Printing Ink
Parameter Setting
Man Machine Interface
Production Speed
100-600 / Min
Packing Size
Depending On The Configuration, Models And Set
Power
50hz 3.5-6.5kw 380v
Weight
About 3000kg Weight Depending On The...
1.Production process: Feeding big Rolls, synchronous conveying, traction, slitting and rewinding
2. The equipment is equipped with a set of pneumatic automatic feeding device;
3.The original cloth is equipped with air expansion shaft unwinding, and with a wide belt conveying, and with stepless tension adjusting device, can freely adjust the speed of unwinding.
4. Equipped with a set of steel roller combined with rubber roller traction, make the production stable, winding neat, not deviatio...
Main technical parameters
Specification model: DL-320
Unfolded size of alcohol pad:30*60mm
Alcohol pad folded size: 30*30mm customized
Cotton sheet folding method: fold in half once, 2 layers or single layer without folding
Bag size: 50*50mm
Processing capacity: 280-350 bags/min
Packaging film material: 73-110g/㎡
Packaging film specifications: Φ≤350 mm, width 400 mm, inner diameter of paper core 76.2mm
Applicable cotton sheet material: coiled, 30-60g/㎡ spunlace non-woven fabric
Non-woven fa...
1.The working principle of the equipment:conveying→automatic vertical folding→material cutting→horizontal folding is completed automatically.
2.the device uses a continuously variable transmission control of the power, servo electrical control product length and with a positive and negative transfer device (domestic only).
3. equipment with wide belt conveyor device and pneumatic pressure plate type control device, automatic feeding device, equipped with gas – up – shaft, Long men...
1.Slicing,folding、perforation、rewinding、counting(per M),products smooth. Adopts round knife,folding device
2.Turbine box control wiring distance (10-60CM)
3.Effective width :1200 mm, maximum diameter:1000 mm
4.The automatic count shutdown function (infrared);
5. power :4.5 kW.
6.rewinding: p40mm roller rewind。Max diameter:300 mm inner paper core:3inch
7.The equipment is equipped with 4 sets of cylinders and special wear-resistant rubber delivery long-spoke pneumatic adjustment ...
1. Production process: Feeding -conveying -embossing-perforating-slitting-rewinding.
2. Equipment have the automatic feeding device, to the feeding device that can support the weight of the largest 600KG(10-80gsm)
3. This equipment with two sets of energy-saving tension control system, can be according to different, free of tension raw material conveying parts of the synchronous adjust every tension, makes the adapted to various material of materials.
4. It is equipped with two embossing roll...
1.Production process: Feeding big Rolls, synchronous conveying, traction, slitting and rewinding
2. The equipment is equipped with a set of pneumatic automatic feeding device;
3.The original cloth is equipped with air expansion shaft unwinding, and with a wide belt conveying, and with stepless tension adjusting device, can freely adjust the speed of unwinding.
4. Equipped with a set of steel roller combined with rubber roller traction, make the production stable, winding neat, not deviatio...
1.The working principle :feeding rolls→hole cutting →automatic vertical folding→length cutting→horizontal folding(3 times)→automatic stacks
2. Its equipped with a synchronous conveying device and a magnetic powder tension controller to ensure the dimensional accuracy of the folded finished product.
3. Its equipped with our innovative multifunctional special-shaped folder, which can convert more product folding modes and is convenient to adjust.
4. It also adopts a servo-controlled slider type...
Using single-arm hanging material to roll, with imported loading forklift, easy to replace raw materials, easy to operate;Each roll of material is equipped with an independent magnetic powder tension controller. According to various mesh structures, the material weight can be adjusted independently, and the tension can be reduced smoothly.
1.Equipment size:L5.5m * W2.0m * H2.2 m. Can process cotton tissue/facial paper tissue.
2.Mechanical properties: A. this machine is a rectangular n...